The clutch three-piece set refers to the clutch friction plate, clutch pressure plate, and clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch installation is shaking, whether it is heavy, and whether it has a long service life.
The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, and its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation.
What does the clutch three-piece set refer to-Youjia
If one of the components in the clutch three-piece set is damaged, generally speaking, it will not be replaced alone. The clutch three-piece set is replaced together. For example, if the release bearing is severely worn, the wear of the friction plate and the pressure plate will not be much better. Therefore, the release bearing, friction plate and pressure plate, commonly known as the clutch three-piece set, are replaced at the same time.
Precautions for replacing the clutch three-piece set:
1. When disassembling and assembling the clutch components, do not use a dry brush to clean to prevent dust;
2. Use special tools to prevent the clutch plate from falling off. During installation, use special tools or the transmission input shaft to align the driven plate with the guide bearing of the transmission shaft;
3. Do not add additional lubricating oil. If you add additional engine oil, it may leave oil stains on the clutch driven plate, causing the clutch to slip.