How to use electromagnetic clutch brake in operation
Speed change: There are situations where the speed is converted during operation. At this time, the clutch is used, and the speed can be changed without closing the drive.
High-frequency operation: The intermittent operation in the fast cycle and the frequency provided by the repeated use of the ON and OFF on the motor are limited, so the clutch is used to make it respond quickly and brake with high precision.
Connection and disconnection action: If a clutch is installed between the drive part and the starting part, the drive part does not need to be stopped. The starting part will connect and disconnect according to the necessary response.
Position calculation: Staying at the measured position or quantitative transmission must rely on high-precision positioning devices. The use of clutch can achieve positioning or quantitative functions.
Buffered start and brake: Start and stop to reduce the impact on the load. The speed can be adjusted for use, but if the heat is too large, the slip time should be shortened.
Holding brake: The brake is used to maintain inertial load, emergency situation, and machine interruption during operation.
