Japanparts Kf-2083 Clutch Kit for Toyota

Diameter [mm]: 210

Inner diameter [mm]: 138

Number of Teeth : 21

Certification: ISO/TS16949:2002

Brand: AHFpro

Model: AK50502

Origin: China

OE Number

AISIN KT339A

AP KT90322

AP KT90321

ASHIKA 92022083

RED-LINE 25TO034

BLUE PRINT ADT330204

EXEDY TYK2198

IAP QUALITY PARTS 20117005

IAP QUALITY PARTS 20117005E

JAPKO 922083

KAISHIN KT339K

KAVO PARTS CP1153

KAVO PARTS CP1113

KAVO PARTS CP1180

MECARM MK9697

VALEO 826707

WESTLAKE WTY067

Type clutches are designed specifically for heavy-duty clutch and brake applications, and are hydraulically actuated.

Can operate at higher actuation pressures, transfers more torque in a smaller envelope and is available in sizes up to 29” in.

The  friction disc packs are suitable for either wet or dry operation. Actuation is accomplished through internal shaft and clutch passages.

Designed and engineered to perfectly match the vehicle's unique performance characteristics, every  is tested and guaranteed to meet critical performance specifications, including torque capacity, material hardness, hub spline tolerance, wear capacity, clamp load, pressure plate lift and torsional vibration dampening.

The clutch disc is the clutch’s central connection element. In combination with the clutch pressure plate, it both separates and links engine and powertrain. It also reduces the speed fluctuations in the gearbox caused by the combustion motor.  offers the best solutions for every application, from clutch discs with simple torsion damper through to variants with multi-stage dampers, from rigid clutch discs for use in the dual mass flywheel right through to the displacement correction clutch disc. 

It was the first company in Europe which engineered the diaphragm spring clutch with a release system which is now installed in every third new car. At present the company manufactures dampers, components for clutch systems, transmissions, as well as products for tractors. The newest innovative product developments of are the automation of manual transmissions, torque converters, and components for CVT transmissions that could handle more than 300 Nm of torque. 

Valeo offers a wide range of clutch kits to fit your vehicle’s needs and your budget.

More powerful engines, longer gear ratios and new lifetime specifications have led to the development and introduction of more complex car clutch designs such as Valeo SAT (Self Adjusting Technology).

The SAT is a Valeo revolutionary technology that uses a self-adjusting facing with a wear compensation device on the pressure plate, thereby enhancing the clutch life and improving pedal comfort. Valeo also supplies its self-adjusting technology to truck manufacturers

As an aftermarket solution provider, Valeo engineers have designed a new technically advanced clutch kit named HEC (High Efficiency Clutch) to replace the competitors’ self-adjusting clutch and give full satisfaction in terms of quality, reliability and durability.

This result is achieved with an improved clutch cover assembly and a low-wear facing (ranging from 190 mm to 260 mm), resulting from years of research in Valeo’s R&D centres. This solution does not require a specialist tool to facilitates fitting operations.

The KIT4P clutch kit provides a complete conversion kit to replace a dual mass flywheel with a solid flywheel for longer durability. The solid flywheel is guaranteed with a 1 million km warranty.

The Valeo clutch kit offer also includes:

3PKIT including concentric slave cylinder (CSC): more than 500 part numbers available

Self adjusting technology (SAT): 74 part numbers available of which high efficiency clutch (HEC): 339 part numbers available

LCV clutches: 434 part numbers available of which 100 part numbers are remanufactured

An expanding car clutch offer for Korean and Japanese car application : 

Valeo provides large business opportunities for Asian clutch part applications, with the same level of quality and services as Valeo’s other ranges.

Valeo is investing in all product lines to vastly extend its clutch kit offer for Korean and Japanese vehicles and help you to rationalise your sourcing.

The clutch is often the unsung hero of your vehicle – it works incredibly hard and without it, you aren’t going anywhere. The different components within a clutch will repeatedly engage and then disengage each and every time you take your car for a drive – which adds up to a lot of wear and tear over time. Eventually, every clutch will need to be replaced, and a clutch kit is often the easiest and most cost-effective way to carry out that replacement. For your convenience,  has a massive range of clutch kits from a wide selection of top car manufacturers.

Increase the torque handling capability of your upgraded 4x4. Perfect for tuned and enhanced 4x4's, or even those who just want to push the limits off-road.

Your engine is constantly on the go, constantly spinning. The clutch is the system by which the engine is engaged and the car drives. It’s the job of the clutch to create a smooth engagement between the engine and a non-spinning transmission.

we strive to offer a variety of clutch options for each vehicle to ensure a clutch solution is available for every vehicle application. Whether you are modifying a road vehicle or building a race car from scratch, we have the clutch solution for you. Our upgrades are divided into different stages depending on the friction disc material and the number of friction discs.

clutches are present in 1 of 3 vehicle in Europe. With 1,100 complete kits references and 700 references for spare parts, including hydraulic clutch switch and racing clutches, Valeo develops and continuously complete its range of clutches for cars, small cars, trucks and tractors

Factory quality  clutches, clutch kits and auto clutch parts make it easy for car drivers to shift gears.

Hill starts, endless traffic jams and winding roads – passenger car clutches face a variety of demands on a daily basis.

Clutch covers are suitable for vehicle characteritics In any automobile from a light passenger car to 54-ton high-power truck, the clutch cover generates a pushing load and determines the pedal effort of the driver.

clutches and clutch parts for commercial vehicles are manufactured using premium materials and are particularly durable. Remanufacturing is even taken into consideration during the design of the clutch. truck clutches are specially tailored to the requirements of the vehicle manufacturers. The truck clutch construction is characterized by the ideal transmission of power from the engine to the road, meaning that the performance of the vehicle is fully utilized. The fact that over 170 million  clutches, truck clutch kits and truck clutch plates have been sold demonstrates the long-standing experience and the high level of competence of the specialists and the market leader in this sector. Furthermore,  commercial vehicle clutches meet the latest environmental standards. The use of facings that are free from asbestos and lead is a standard feature,

The thin metal discs offer greatly reduced inertia to improve shift effort allowing for quicker shifting and improved synchro durability

Clutch covers are designed to achieve clamp loads that are 40% than the OE part allowing a higher torque transmitting capacity

Pressure plates are manufactured using ductile material allowing for high burst strength in all temperature ranges

The unique Ductile material ensures durability and long life.

Our three and four puck designs typically have less inertia than a stock disc and work well for street,rally andtrack use

Company Profile

WUHU HEFENG CLUTCH CO.,LTD(in short"HEFENG")
50thousand sq.m, more than 230 employees, over 30 managements.

FAQ

Our Advantages

1: Design & Development

The testing center covers an area of 2,000 m2, with over 60 experimental and detection instruments and over 20 engineering technicians. Hefeng meets customer needs on product details at full speed by developing new products with the support of professional technical teams and the well-organized testing center.

2: Manufacturing Process

We establish the state-of-the-art process from design, inspection to production and adopt the cutting-edge production techniques such as mold design, overall performance test, numerical control, heat treatment and production line installation.

3: Production Method
Eager for pursuing lean production and lower manufacturing cost, we apply ERP system and flexibly auto production line to satisfy customer needs on production cycle. With the automatic tracking system on our computers, each production link will reach the overall efficiency for equipment production.

4: Product Testing

Full set automatic testing equipment for finished products ensures remarkable quality of products installed. We are capable of detecting and tracking the production steps of each product by encoding traceable data.

5: Quality Assurance

Hefeng has been certified by the Quality Management System (IATF 16949-21016) and the Environmental Management System (GB/T 24001-2016/ISO 14001:2015). Over 20 years of experience in production makes us a stable supplier for automakers. It is our original intention to guarantee the raw materials of products.

Exhibitions

Hot Tags: japanparts kf-2083 clutch kit for toyota, China, suppliers, manufacturers